Panasonic dBs Instrucciones de operaciones descargar pdf (Pagina 37)

Panasonic Digital Business System - Operating Instructions

March 1997 Issue 24

Termination Of Trunk To Trunk Calls

Trunk to trunk termination is initiated by either clear signal detection (CPC/DCT/CDT), timer or operator

intervention.

If clearing by clear signal detection is selected the timer option is disabled. The DBS will, however, clear any trunk

to trunk call after 4 hours. Before clearing the call it will give a 3 beep warning 1 minute before and 5 beeps at 10

seconds before cutting off the call.

The operator can cut off calls if on hook transfer is disabled. To do this the operator selects a busy line, breaks in

by dialling 4,places the calls on hold with the HOLD key then selects each line in turn an clears it down by hanging

up.

The call logging record produced after a transfer will allocate the call to the extension which transferred the call.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 147 148

Sin comentarios

Panasonic dBs Instrucciones de operaciones Pagina 37