Panasonic WJMP204 Instrucciones de operaciones descargar pdf (Pagina 17)

(4) Parity Check Setting

1. Display the COMMUNICATION menu.

2. Move the cursor to PARITY CHECK by pressing button

1 (C) or button 2 (D), then select the desired type of

parity check (NONE, EVEN or ODD) by pressing button

3 (–) or button 4 (+).

The initial factory setting is NONE.

(5) Stop Bit Setting

1. Display the COMMUNICATION menu.

2. Move the cursor to STOP BIT by pressing button 1 (C)

or button 2 (D), then select the desired number of stop

bits, 1 or 2 by pressing button 3 (–) or button 4 (+).

The initial factory setting is 1 bit.

(6) Wait Time Setting

1. Display the COMMUNICATION menu.

2. Move the cursor to WAIT TIME by pressing button 1

(OFF, 100, 200, 400, or 1000 ms) by pressing button 3

(–) or button 4 (+).

The initial factory setting is OFF (No retry).

(7) Delay Time Setting

1. Display the COMMUNICATION menu.

2. Move the cursor to DELAY TIME by pressing button 1

(OFF, 10, 20, 40, or 100 ms) by pressing button 3 (–) or

button 4 (+).

The initial factory setting is OFF.

(8) XON/XOFF Setting

1. Display the COMMUNICATION menu.

2. Move the cursor to XON/XOFF by pressing button 1

NOT USE or USE, by pressing button 3 (–) or button 4

(+).

The initial factory setting is NOT USE.

(1) Camera Addresses Setting

1. Display the COMMUNICATION menu.

2. Move the cursor to CAM ADDRESS by pressing button

1 (C) or button 2 (D), press the SUSPEND/SET button,

and then select the desired camera addresses in the

range of 1 to 99 or No Camera by pressing button 3 (–)

or button 4 (+).

Note:

• Check before the above setting that the UNIT

switch is at 0. For address setting, see page 10.

• Before switching the Data Multiplex Unit back on,

remember that address setting with the UNIT switch

has priority to the above setting.

(2) Baud Rate Setting

1. Display the COMMUNICATION menu.

2. Move the cursor to BAUD RATE by pressing button 1

(19200, 9600, 4800, or 2400 bps) by pressing button 3

(–) or button 4 (+).

The initial factory setting is 19200bps.

(3) Data Bit Setting

1. Display the COMMUNICATION menu.

2. Move the cursor to DATA BIT by pressing button 1 (C)

or button 2 (D), then select the desired number of data

bits, 7 or 8, by pressing button 3 (–) or button 4 (+).

The initial factory setting is 8 bit.

CAM ADDRESS

CAMERA IN ADDRESS

1CH 1

2CH 2

3CH 3

4CH 4

COMMUNICATION

CAM ADDRESS

BAUD RATE 19200

DATA BIT 8

PARITY CHECK NONE

STOP BIT 1

WAIT TIME OFF

DELAY TIME OFF

XON/XOFF NOT USE

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 30 31

Comentarios a estos manuales

Sin comentarios

Panasonic WJMP204 Instrucciones de operaciones Pagina 17

Comentarios a estos manuales

Relacionado con productos y manuales para Cámaras De Seguridad Panasonic WJMP204