Panasonic WJMP204 Instrucciones de operaciones descargar pdf (Pagina 16)

WJ-MP204 SETUP MENU X.XX

COMMUNICATION

SYSTEM

■ Displaying the Setup Menu of

Camera Communication Mode

1. Check that the cameras and peripherals are connected

correctly and securely.

2. Switch all the system components on.

3. Press the SETUP/ESC button for 2 seconds or more.

The Setup menu appears on the monitor.

4. Move the cursor up or down pressing button 1 (C) or

button 2 (D).

5. Press the SUSPEND/SET button. The COMMUNICA-

TION menu or the SYSTEM menu appears on the moni-

tor as shown below.

• The following buttons are used with the Setup menu.

1 (C): To move the cursor down

2 (D): To move the cursor up

3 (–): To select a mode or parameter

4 (+): To select a mode or parameter

SUSPEND/SET: To enter the selections and display

the submenu for the item indicated by the mark

SETUP/ESC: To return to the previous menu.

COMMUNICATION

CAM ADDRESS

BAUD RATE 19200

DATA BIT 8

PARITY CHECK NONE

STOP BIT 1

WAIT TIME OFF

DELAY TIME OFF

XON/XOFF NOT USE

SYSTEM

ALARM MODE ON

COMP/VD2/DATA

VS/VD INPUT VD

DAISY MODE ON

TERMINAL ALARM

Notes:

• To not display the Setup menu for camera output pic-

tures, shift the internal switch. (See page 25.)

• To finalize the settings, press the SETUP/ESC button

for 2 seconds or more while the Setup menu is dis-

played.

• To use the System Controller WV-CU360 for operation,

refer to its Operating Instructions.

■ Communication Setup for

Camera Communication Mode

1. Display the Setup menu.

2. Move the cursor to COMMUNICATION by pressing

button 1 (C) or button 2 (D). Then press the SUS-

PEND/SET button.

• In case of Camera Communication mode, the

COMMUNICATION menu appears as shown

below.

3. Move the cursor to the desired item by pressing button

1 (C) or button 2 (D), then select the desired mode by

pressing button 3 (–) or button 4 (+).

4. Press the SUSPEND/SET button.

5. After taking the above steps, press the SETUP/ESC

button for 2 seconds or more.

Note: All the settings must be compatible with the

peripherals connected.

COMMUNICATION

CAM ADDRESS

BAUD RATE 19200

DATA BIT 8

PARITY CHECK NONE

STOP BIT 1

WAIT TIME OFF

DELAY TIME OFF

XON/XOFF NOT USE

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 30 31

Comentarios a estos manuales

Sin comentarios

Panasonic WJMP204 Instrucciones de operaciones Pagina 16

Comentarios a estos manuales

Relacionado con productos y manuales para Cámaras De Seguridad Panasonic WJMP204