Panasonic WV-SF548E Guía de instalación descargar pdf (Pagina 27)

When using PoE (IEEE802.3af compliant)

Connect a LAN cable (category 5 or better, straight, STP*) between a PoE device (such as a hub)

and the network connector of the camera.

* E models only

IMPORTANT:

 • Useall4pairs(8pins)oftheLANcable.

 • Themaximumcablelengthis100m{328feet}.

 • MakesurethatthePoEdeviceinuseiscompliantwithIEEE802.3afstandard.

 • Whenconnectingboththe12VDCpowersupplyandthePoEdeviceforpowersupply,12V

DC will be used for power supply. Depending on the PoE device used, the power supply lamp

may not light and the network connections may not be possible. In this case, disable the PoE

device setting, and refer to the operating instructions of the PoE device in use.

 • WhentheLANcableisdisconnectedonce,reconnectthecableafterabout2seconds.When

the cable is quickly reconnected, the power may not be supplied from the PoE device.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 47 48

Sin comentarios

Panasonic WV-SF548E Guía de instalación Pagina 27