Panasonic WV-SF548E Guía de instalación descargar pdf (Pagina 13)

Precautions for Installation

Panasonic assumes no responsibility for injuries or property damage resulting from fail-

ures arising out of improper installation or operation inconsistent with this documentation.

This camera is designed to be used indoors.

This product is not operable outdoors.

Do not expose this camera to direct sunlight for

hours and do not install the product near a heater

or an air conditioner. Otherwise, it may cause

deformation, discoloration and malfunction. Keep

this camera away from water and moisture.

Installing place

Contact your dealer for assistance if you are

unsure of an appropriate place in your particu-

lar environment.

 • Make sure that the installation area is

strong enough to hold this product, such

as a concrete ceiling.

 • Installthecamerainthefoundationareaof

the architecture or where sufficient strength

is assured.

 • If a ceiling board such as plaster board is

too weak to support the total weight, the

area shall be sufficiently reinforced.

Do not place this product in the following

places:

 • Locations where it may get wet from rain

or water splash

 • Locationswhereachemicalagentisused

such as a swimming pool

 • Locationssubjecttomoistureoroilsmoke

such as a kitchen

 • Locationsthathaveaspecificenvironment

that is subject to an inflammable atmo-

sphere or solvents

 • Locations where a radiation, an X-ray, a

strong radio wave or a strong magnetic

field is generated

 • Locations where corrosive gas is pro-

duced, Locations where it may be dam-

aged by briny air such as seashores

 • Locations where the temperature is not

within the specified range (page 43).

 • Locationssubject tovibrations (Thisprod-

uct is not designed for on-vehicle use.)

 • Locations subject to condensation as the

result of severe changes in temperature

(In case of installing the camera in such loca-

tions, the dome cover may become foggy or

condensation may be caused on the cover.)

Be sure to remove this product if it is not

in use.

Shielded (STP) LAN cables must be used

with this unit to ensure compliance with

EMC standards. *

* E models only

Before installation

 • The camera mount bracket described on

page 19 shall be used to mount the cam-

era.

 • When this camera and camera mount

bracket are mounted on a ceiling or a wall,

use the screws described on page 19. The

screws to be used are not provided.

Prepare the screws according to the mate-

rial, structure, strength and other factors of

the mounting area and the total weight of

objects to be mounted.

 • Ensure that the mounting surface, anchor

and screws are sufficiently strong.

 • Do not mount this product on a plaster

board or a wooden section because they

are too weak. If this product is unavoidably

mounted on such a section, the section

shall be sufficiently reinforced or use an

optional ceiling mount bracket (WV-Q105).

About the network connection

When connecting to a network using the net-

work cable of this product, observe the follow-

ing.

 • When wiring for the network, design and

engineer not to be affected by thunder.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 47 48

Comentarios a estos manuales

Sin comentarios

Panasonic WV-SF548E Guía de instalación Pagina 13

Comentarios a estos manuales

Relacionado con productos y manuales para Cámaras De Seguridad Panasonic WV-SF548E