Panasonic WV-CW504 Guía de instalación descargar pdf (Pagina 22)

x Remove the enclosure and inner

dome from the main body by loos-

ening the three fixing screws.

Loosen the three fixing screws by using

the provided bit for tamperproof screw.

Detach the inner dome while pushing the

parts with the "PUSH" indication.

Important:

 • Donotholdtheinnerdomewhencarrying

the camera. Otherwise, the camera part

may fall and it may damage the camera.

Note:

 • Performthesameprocedurewhenreplac-

ing with the optional dome cover WV-

CW4S.

c Secure the camera to the bracket

with the camera fixing screw (red, 1

position).

Important:

 • The camera fixing screw shall be securely

tightened. Otherwise, water exposure may

cause damage or malfunction of camera,

or camera dropping may result in injury.

(Recommended tightening torque:

0.78 N·m)

v Remove the screw (blue, 1 position)

for transport protection with a

Phillips screw driver.

Press the parts with the

"PUSH" indication.

Screw for transport protection (blue)

Camera ﬁxing screw (red)

* The camera ﬁxing screw

shall be securely tightened.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 43 44

Sin comentarios

Panasonic WV-CW504 Guía de instalación Pagina 22