Panasonic WJSX350 Instrucciones de operaciones descargar pdf (Pagina 53)

-51-

321

654

987

FWDBACK

CAM

MON

SETESC

HISTORY

2. Press the +1 CAM INC button to replace the cur-

rently selected camera with the next higher camera

number.

+1 CAM

INC

3. Camera Selection

1. Select the camera number (1 to 32) by pressing

the Numeric buttons, then press the CAM (SET)

button.

The selected camera picture appears on the cur-

rently selected monitor.

3. Press the –1 CAM DEC button to replace the cur-

rently selected camera with the next lower camera

number.

−1 CAM

DEC

Notes:

• The BUSY indicator lights up, if the camera is

selected by a higher priority operator. Control of the

same camera is denied to an operator with a lower

priority.

• The noise viewed white may appear on the moni-

tor screen during the spot or sequence camera

selection. This is normal phenomenon and not mal-

function.

4. Lens Control

Note: Confirm that the specified lens, with power

zoom/focus functions is mounted on the camera.

Also confirm that the Lens Selection (DC/VIDEO) on

the camera is set to the DC position.

Function capabilities vary between cameras.

Referring to the operating instructions of each cam-

era is recommended.

1. Select the desired monitor and camera.

Refer to Monitor Selection and Camera Selection on

pages 50 and 51.

AUTO FOCUS

4. Press the Zoom (ZOOM TELE/WIDE) switch to

adjust the lens zoom to achieve the desired picture

while observing the monitor.

Press this switch to the TELE position to optically

bring an object closer. Pressing to the WIDE posi-

tion has the reverse effect.

NEAR FAR

FOCUS

3. Press the Auto Focus (AUTO FOCUS) button to

adjust the lens focus automatically, equipped the

specified camera with the auto focus feature, such

as the Panasonic WV-CSR600 series is used.

TELE WIDE

ZOOM

IRIS

CLOSE OPEN

IRIS RESET

5. Press the Lens Iris (IRIS CLOSE, OPEN) buttons to

close/open the lens iris. Adjust the lens iris by

using the buttons to obtain the proper picture expo-

sure.

By pressing both of these buttons at the same time,

the lens iris is set to the factory preset condition.

Note: When a camera, with an ALC Lens, has AGC

turned on, the iris close, open function will

operate slowly. By pressing the above buttons

repeatedly (instead of holding down), this func-

tion will operate faster.

6. If the Lens Control needs fine adjustment, press the

FOCUS, ZOOM or IRIS switch or button, while

pressing the PAUSE button.

2. Press the Focus (FOCUS NEAR/FAR) switch to

adjust the lens focus to achieve a sharply focused

picture while observing the monitor.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 67 68

Comentarios a estos manuales

Sin comentarios

Panasonic WJSX350 Instrucciones de operaciones Pagina 53

Comentarios a estos manuales

Relacionado con productos y manuales para Cámaras De Seguridad Panasonic WJSX350