Panasonic KXP7200 Instrucciones de operaciones Pagina 30
- Pagina / 408
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Top Margin
Setting:
ESC “&l#E”
#=Number of lines
This command sets the top margin. The top margin indicates the margin on the
upper end of the printing paper.
The desired length of the margin is entered by the number of the lines(1 line =
VMI) in the value field #, and any value from 0 to the page length can be used.
The default setting is ½ inch from top of logical page.
When the top margin is set, the text length returns to the default setting.
Since an unprintable area of 60 dots exists on the upper end of the printing
paper, some upper part of text cannot be printed when the top margin is set as 0
or 1 line.
This command only sets the top margin. It does not move the printing position to
the top margin. Therefore, the printing position must be moved to the top margin
by the vertical movement of the printing position command when printing from
the top margin is required. Otherwise the printing from the top margin is effective
only on the next page. When VMI is 0, this command is invalid.
- Software Commands Manual 1
- Table of Contents 1
- PCL Commands 2
- PJL Commands 3
- Printing Description 4
- Printable Area 7
- Coordinate System 12
- Built-in Fonts 13
- Terms for Bitmap Font 16
- Figure 2.5 Character cell 17
- Fixed Pitch Characters 18
- Paper Formatting 19
- Portrait Printing Mode 20
- Landscape Printing Mode 21
- Print Start Conditions 22
- Compression Mode 24
- Orientation 28
- Page Size 29
- Print Direction 29
- Top Margin 30
- Text Length, Bottom Margin 31
- Skip Perforation 32
- Left Margin 32
- Right Margin 33
- Vertical Motion Amount 33
- Horizontal Motion Amount 35
- Font Selection 36
- Symbol Set 37
- Print Pitch 40
- Character Height 40
- Character Style 41
- Stroke Weight 42
- Typeface 43
- Default Font Selection 45
- Moving the Printing Position 46
- Horizontal Movement 47
- Vertical Movement 48
- Raster Graphics 49
- Portrait mode 0 & 3 50
- Raster Width 51
- Raster Y Offset 52
- Set Compression Mode 53
- End Raster Graphics Mode 68
- Font Downloading 71
- Bitmap Font 72
- BASELINE POSITION: 76
- CELL WIDTH: 76
- CELL HEIGHT: 77
- ORIENTATION: 78
- FIXED/PROPORTIONAL: 78
- SYMBOL SET: 78
- WIDTH TYPE: 81
- STYLE LSB: 81
- STROKE WEIGHT: 82
- TYPEFACE LSB,TYPEFACE MSB: 83
- SERIF STYLE: 84
- QUALITY: 85
- PLACEMENT: 85
- UNDERLINE THICKNESS (HEIGHT): 86
- TEXT HEIGHT: 86
- TEXT WIDTH: 86
- PITCH EXTENDED: 87
- FONT NUMBER: 88
- FONT NAME: 88
- X RESOLUTION: 88
- Y RESOLUTION: 88
- OR THRESHOLD: 98
- GLOBAL ITALIC ANGLE: 98
- CHARACTER COMPLEMENT: 98
- GLOBAL Intellifont DATA SIZE: 101
- GLOBAL Intellifont DATA: 101
- COPYRIGHT: 101
- CHECKSUM: 101
- TrueType Scalable Font 102
- FONT TYPE: 104
- STYLE MSB: 104
- FONT DESCRIPTOR SIZE: 104
- DESCRIPTOR FORMAT: 104
- Deciding the Character Code 109
- Intellifont Scalable Font 111
- CONTINUATION: 114
- DESCRIPTOR SIZE: 115
- CHARACTER DATA: 117
- CONTOUR TREE OFFSET: 118
- XY DATA OFFSET: 118
- NUMBER OF COMPONENTS: 119
- CHARACTER CODE: 119
- X OFFSET, Y OFFSET: 119
- CHARACTER DATA SIZE: 120
- GLYPH ID: 120
- TrueType GLYPH DATA: 120
- ´Top Offset 124
- 'Top Offset 127
- Landscape mode 129
- Portrait mode 129
- Font Control 130
- User-Defined Symbol Set 132
- HEADER SIZE: 133
- SYMBOL SET TYPE: 133
- FIRST CODE: 133
- LAST CODE: 134
- CHARACTER REQUIREMENTS: 134
- SYMBOL MAP: 135
- Assigning ID Code 136
- Defining Symbol Set 136
- Controlling Symbol Set 136
- Definition of Macro ID 137
- Starting to Download a Macro 137
- Downloading Macro Data 138
- Ending the Macro 138
- Executing a Macro 138
- Call macro 139
- Controlling a Macro 142
- Print Model 143
- Select Current Pattern 146
- Logical Operation 147
- Pixel Placement Command 155
- Advanced Graphics 156
- Start Printing 157
- User-Defined Pattern Graphics 160
- Downloading Pattern Data 161
- Tiling the Pattern 163
- Controlling the Pattern 163
- Status Readback 164
- Status Response 165
- Entity Status Responses 167
- Entity Error Code 172
- Free Space Command 173
- Flush All Pages Command 174
- Echo Command 174
- Miscellaneous 175
- Automatic Underlining 176
- Push/Pop Printing Position 176
- Backspace 177
- Line Feed 177
- Form Feed 177
- Carriage Return 177
- Horizontal Tab 177
- Half Line Feed 178
- CR/LF/FF Action 178
- Automatic Wrap Around 178
- Select Number of Copies 179
- Paper Input Control 179
- Duplex Page Side Selection 180
- Simplex / Duplex Print 181
- Self-test 183
- Left Offset Registration 183
- Top Offset Registration 184
- Deciding PCL Units 185
- PCL Picture Frame 186
- Anchor Point Location 191
- Horizontal Plot Size of GL 192
- Vertical Plot Size of GL 193
- Entering PCL mode 194
- Entering GL mode 195
- HP-GL/2 Command 196
- HP-GL/2 Commands 199
- Parameter Range 201
- Adjusting the GL Image 206
- GL Coordinate System 207
- Plotting Units 210
- Pen Status and Location 211
- Pen Location 212
- Pen Movement 215
- Defaulting Values 218
- Initializing 220
- Inputting P1 and P2 221
- Figure 3.43 Using IPcommand 222
- Inputting Relative P1 and P2 223
- Inputting Window 225
- Rotating Coordinate System 227
- The Polygon Group 234
- Arc Angle (degrees) 237
- Chord Angle (degrees) 237
- Edging Rectangle Absolute 238
- Edging Polygon 239
- Edging Rectangle Relative 240
- Edging Wedge 241
- sets a remainder of: ( 242
- sets the angle clockwise 243
- sets a wedge angle to 360° 243
- Filling Polygon 245
- Polygon Mode Command 247
- Filling Rectangle Absolute 250
- Filling Rectangle Relative 251
- Filling Wedge 252
- The Vector Group 254
- Arc Absolute 257
- Arc segment 258
- Drawn chord 258
- Chord angle 258
- Arc Relative 259
- Absolute Arc Three Point 260
- Bezier Curve Relative 262
- Figure 3.54 263
- Bezier Curve Absolute 264
- Starting Point 265
- (1st Control Point) 265
- Plotting Absolute 268
- Pen Down 269
- Polyline Encoded 270
- ¥ 0 m=2x × 2 273
- Plotting Relative 274
- Relative Arc Three Point 277
- Arc join 281
- Anchor Corner 283
- Filling Type 283
- Line Attributes 287
- > New miter length 288
- No join (kind 2,value 6) 291
- Figure 3.59 No join 291
- Miter limit 292
- Line Type 293
- Relative Mode 296
- Absolute Mode 296
- Merge Control 298
- Pen Width 299
- Raster Fill Definition 301
- Symbol Mode 303
- Selecting Pen 304
- Screened Vectors 305
- Transparency Mode 307
- User-Defined Line Type 309
- Pen Width Unit Selection 310
- The Character Group 311
- Bitmap fonts 317
- command 317
- Figure 3.65 Cell 318
- Alternate Font Definition 321
- Character Fill Mode 323
- white edging 324
- black edging 324
- Character Plot 325
- stops a vertical move 326
- Relative Direction 331
- Defining Label Terminator 332
- only performs its function 333
- prints the label terminator 333
- Defining Variable Text Path 334
- Extra Space 337
- Selecting Primary Font 338
- Selecting Secondary Font 338
- Labeling 339
- Labeling Origin 340
- Selecting Alternate Font 343
- Scalable or Bitmap Fonts 343
- Standard Font Definition 344
- Absolute Character Size 351
- Character Slant 353
- Negative slant 354
- Relative Character Size 355
- Selecting Standard Font 357
- Transparent Data 358
- PJL Command Syntax and Format 360
- Print Environment Composition 362
- PJL Reset Conditions 366
- Environment Variables 366
- Status Message 367
- Usage of Command 368
- Entering the PJL mode 372
- Setting User Default 373
- Inquiring User Default 374
- ECHO Command 375
- Inquiring PJL Current Default 377
- Resetting 378
- USTATUS Command 379
- •variable=JOB value=ON 380
- •variable=PAGE value=ON 381
- USTATUSOFF Command 382
- JOB Command 383
- EOJ Command 384
- (Output) 387
- Environment Value Details 388
- Status Code 397
- Informational Message 398
- Paper Tray Status (12xyy) 399
- PJL Parser Errors (20xxx) 400
- PJL Parser Warnings (25xxx) 402
- PJL Semantic Errors (27xxx) 403
- Paper Loading (41xyy) 407
- Paper Jam Message (421xx) 408
- Hardware Errors (50xxx) 408
Relacionado con productos y manuales para Impresión y escaneo Panasonic KXP7200
(88 paginas)
(88 paginas)
(140 paginas)
(104 paginas)
(80 paginas)
(83 paginas)
(88 paginas)
(36 paginas)
(112 paginas)
(140 paginas)
(92 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.077 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales