Panasonic SDRS150 Instrucciones de operaciones Pagina 71

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 116
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 70
71
VQT0X49
What is DPOF?
DPOF stands for Digital Print Order Format. This enables picture printing information to
be written onto an SD card so that it can be used on a system supporitng DPOF.
To print pictures by directly connecting this unit to the printer, use a printer compatible
with PictBridge. (Read the operating instructions for the printer.)
¬Connect this unit to the AC adaptor.
¬Rotate the mode dial to select .
1 Open the terminal cover, then firmly
plug one end of the USB cable 1
(supplied) into the unit’s USB terminal
and the other end into the terminal on
the printer.
Insert the plugs as far as they will go.
The images recorded on the SD card are
displayed as thumbnails.
When no SD card is inserted in this unit, the
[ ] indication does not appear. (You
cannot print any pictures.)
When this unit and the printer are not
connected properly, the [ ] indication
keeps blinking. (It will blink for over approx.
1 minute.) Connect the cable or check the
printer.
Do not use any other USB cables except the
supplied one. (Operation is not guaranteed
with any other USB cables.)
The DPOF setting can be established for up to 999 scenes.
DPOF setting made on another camera may not be recognised by this unit. Please
perform the
DPOF settings on this unit.
You cannot add the recording date to pictures to be printed with the DPOF settings.
If the write protection switch on an SD card is set to [LOCK], the DPOF setting cannot
be set. (P17)
PictBridge
This is for printing pictures by directly connecting to the printer.
1
SETUP ENTER
1/24
1/24
1/24
PictBridge
PictBridge
PictBridge
VQT0X49ENG.book 71 ページ 2006年6月6日 火曜日 午後2時1分
Vista de pagina 70
1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 115 116

Comentarios a estos manuales

Sin comentarios