Panasonic WV-ASR500 Guía de instalación Pagina 29

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 69
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 28
28
29
Serial Ports
The "Serial Ports" page allows you to configure serial ports on this system so that they can be used to commu-
nicate with serial devices such as POS terminals or pan-tilt-zoom (PTZ) cameras. There are two "Serial Ports"
sections — one for standard UART (Universal Asynchronous Receiver/Transmitter) and one for serial ports over
IP.
For a UART serial port, connect the wires to the serial port and then configure the port. The system automati-
cally detects and displays the serial ports. You can configure the following settings on each port:
Select the intended use of the serial port from the q
drop-down list in the "Use" column. The choices
are "Unused", "PTZ" (pan/tilt/zoom), "POS" (point
of sale), "ATM" (automatic teller machine), or
"Access Ctrl". Generally, the POS mode is used to
record transactions at a cash register. By default,
the last serial port listed is the built-in RS-485
port.
Enter a unique name in the "Name w " field.
The "Status" column displays the current status of e
the serial port.
The "Port" is automatically selected by the r
Operating System.
The " t Profile/Protocol" column allows you to select
one of the profiles configured on the "Serial
Profile" page.
The "Baud Rate", "Data Bits", "Stop Bits", y
"Parity", and "Flow Control" must match the
device you are connecting to. See the device's
documentation for more information.
The "Max Line Length" is 80 by default. Generally, u
you should not change this.
"Line Ending" is the number of characters i
received before an end-of-line character is
inserted automatically. This prevents lines from
becoming extremely large.
"Timeout" is the number of seconds after which o
an end-of-line character is entered if a serial
device has not sent text. This is useful if the serial
data does not have an end-of-line character but it
hasn't reached the number of characters entered
in "Line Ending".
When you are 0! finished, save the settings by click-
ing the [Apply] button at the bottom of the list.
wq e r t u i oy
!0
Vista de pagina 28
1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 68 69

Comentarios a estos manuales

Sin comentarios