Panasonic WV-SW352 Guía de instalación descargar pdf (Pagina 28)

v Connect a LAN cable (category 5e or better, straight, STP*) to the network connector.

* PAL model only

b Connect the power cable.

 • Whenusing12VDCpowersupply*

Connect the output cable of the AC adaptor to the 2P power cable.

 • WhenusingPoE(IEEE802.3afcompliant)

Connect a LAN cable (category 5 or better, straight, STP*

) between a PoE device (such as a

hub) and the network connector of the camera.

*1 FOR UL LISTED MODEL(S), ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY.

*2 PAL model only

Important:

 • Useall4pairs(8pins)oftheLANcable.

 • Themaximumcablelengthis100m{328feet}.

 • MakesurethatthePoEdeviceinuseiscompliantwithIEEE802.3afstandard.

 • Whenconnectingboththe12VDCpowersupplyandthePoEdeviceforpowersupply,PoE

will be used for power supply.

 • WhentheLANcableisdisconnectedonce,reconnectthecableafterabout2seconds.When

the cable is quickly reconnected, the power may not be supplied from the PoE device.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 51 52

Sin comentarios

Panasonic WV-SW352 Guía de instalación Pagina 28