Panasonic WV-SW352 Guía de instalación descargar pdf (Pagina 26)

Caution:

 • FORULLISTEDMODEL(S),ONLYCONNECT12VDCCLASS2POWERSUPPLY.

Turn off a circuit breaker before making a connection. Before starting the connection, prepare the

required devices and cables.

Note:

 • Whenusingthemountbracket(accessory),itispossibletoconnectthecablesaftermounting

the camera onto the mount bracket.

 • Refertopage20whenconnectingtheconduit.

Connection

Network cable

* PAL model only

RJ-45 (female)

Alarm input/output cable 4P alarm cable (accessory)

Power cable

(12 V DC)

2P power cable (accessory)

12 V DC (red)

GND (black)

Microphone/line input cable (white)

Audio output cable (black)

Power cable

12 V DC

Red Positive

Black Negative

z Connect the microphone/line input cable and the microphone (for use of the audio reception

function).

Input impedance: 2 kΩ±10 %

Recommended cable length: Less than 1 m {3.28'} (for microphone input)

Less than 10 m {32.8'} (for line input)

Recommended microphone: Plug-in power type microphone (option)

Connect a mini plug (ø3.5 mm).

Supply voltage: 2.5 V ±0.5 V

Recommended sensitivity of microphone: −48 dB ±3 dB (0 dB=1 V/Pa,1 kHz)

Important:

 • Connect/disconnect the external speaker cables or audio/video cables after turning off the

power of the camera and the amplifier. Otherwise, loud noise may come out from the speaker.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 51 52

Sin comentarios

Panasonic WV-SW352 Guía de instalación Pagina 26