Panasonic WV-SC386 Guía de instalación descargar pdf (Pagina 22)

Step 4

Rotate the camera counterclockwise to detach the cam-

era from the camera mount bracket (accessory).

IMPORTANT:

 • When mounting thecamera onto thecamera mount

bracket, hold the main body of the camera. Mounting

the camera while holding the dome cover may result

in malfunction.

Step 5

Detach the cables from the camera.

Step 6

Detach the safety wire from the camera.

Detach the camera

The camera is fixed on the camera mount bracket using the fixing screw. Remove the camera by following the instructions

below.

IMPORTANT:

 • Donotdetachthecamerainadifferentwayfromtheonedescribedbelow.Itmaydamagethecamera.

Step 1

Detach the decorative cover from the camera.

• Pullthedecorativecoverdowntoremoveitfromthe

ceiling.

• Releasethestoppersbypressingthedecorativecover

in the direction of the arrows on the side decorative

cover.

Release both stoppers.

Hold securely and

disengage them.

Hold securely and

disengage them.

IMPORTANT:

 • Makesurethatnocableispinchedbythedecorative

cover.

Step 2

Detach the 12 V DC power cable plug (accessory) and the

LAN cable from the camera, and then turn off the power

of the camera.

Rotate

Camera mount bracket

(accessory)

Main body of

the camera

Step 3

Remove the fixing screw (M3, accessory) that is fixing the

camera on the camera mount bracket (accessory).

Do not lose the fixing screw.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 35 36

Comentarios a estos manuales

Sin comentarios

Panasonic WV-SC386 Guía de instalación Pagina 22

Comentarios a estos manuales

Relacionado con productos y manuales para Cámaras De Seguridad Panasonic WV-SC386