Panasonic WV-SC386 Guía de instalación descargar pdf (Pagina 19)

• 12 V DC power supply terminal

q Loosen the screw of the power cable plug (accesso-

ry).

w Connect the output cable to the power cable plug.

Strip 3 mm to 7 mm {1/8 inches to 9/32 inches} from

the end of the wire, and twist the stripped part of the

wire sufficiently to avoid short circuit.

Specification of cable (wire): 16 AWG - 24 AWG,

Single core, twisted

* Check whether the stripped part of the wire is not

exposed and is securely connected.

e Tighten the screw of the power cable plug.

r Connect the power cable plug to the 12 V DC power

supply terminal on the rear of the camera.

* FOR UL LISTED MODEL(S), ONLY CONNECT 12 V

DC CLASS 2 POWER SUPPLY.

IMPORTANT:

 • The12VDCpowersupplyshallbeinsulatedfromthe

commercial AC power.

 • Be sure to use the power cable plug provided with

this product.

 • Be sure to fully insert the power cable plug into the

12 V DC power supply terminal. Otherwise, it may

damage the camera or cause malfunction.

 • Be sure to use an AC adaptor compliant with the

Specifications regarding power source and power

consumption (☞ page 31).

Power cable plug

(accessory)

−

–

Approx. 3 mm - 7 mm

{1/8 inches - 9/32 inches}

Strip range

Step 9

After completing the cable connections, attach the deco-

rative cover (accessory).

q Separate the provided decorative cover into 2 pieces.

 • Releasethestoppersbypressingthedecorative

cover in the direction of the arrows on the side

decorative cover.

Release both stoppers.

Hold securely and

disengage them.

Hold securely and

disengage them.

Rear view

Release the

stoppers

IMPORTANT:

 •

When pressing to the reverse direction, it may damage

the decorative cover.

w Attach the decorative cover to the camera.

 • Positionthepiecesofthedecorativecoverthathave

been split in step 9 to tuck down the camera body,

and then attach them together.

Attach the decorative cover by aligning the direction

of the Panasonic logo and the cut out parts.

Push up the decorative cover as shown in the

illustration.

Hold one of 2 pieces securely

and engage them.

Push

Rear view

Attach the

stoppers

Align the direction of the Panasonic logo and the cut out part.

* If the directions are not aligned, the decorative cover make come off.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 35 36

Comentarios a estos manuales

Sin comentarios

Panasonic WV-SC386 Guía de instalación Pagina 19

Comentarios a estos manuales

Relacionado con productos y manuales para Cámaras De Seguridad Panasonic WV-SC386