Panasonic WV-SC386 Guía de instalación descargar pdf (Pagina 18)

Center of the

camera mount bracket

Guide part

Lock plate

Camera mount bracket

(accessory)

Rotate

Main body

of the

camera

20 °

IMPORTANT:

 • When mounting thecamera onto thecamera mount

bracket, hold the main body of the camera. Mounting

the camera while holding the dome cover may result

in malfunction.

Step 7

Fix the camera on the camera mount bracket (accessory)

using the camera fixing screw (M3, accessory).

Recommended tightening torque: 0.68 N·m {0.50 lbf·ft}

Step 8

Connect the cables to the network connector and the

power inlet.

IMPORTANT:

 • Do not touchthe camera inthe process of initializa-

tion. Otherwise, it may fail to initialize and may cause

malfunction.

Network connector

12 V DC power supply terminal

• Network connector

Connect a LAN cable (category 5 or better, STP*) to the

network connector.

* E model only

IMPORTANT:

 • Useall4pairs(8pins)oftheLANcable.

 • Themaximumcablelengthis100m{328feet}.

 • Make sure that the PoE device in use is compliant

with IEEE802.3af standard.

 • When connecting both the 12 V DC power supply

and the PoE device for power supply, 12 V DC will be

used for power supply.

 • WhentheLANcableisdisconnectedonce,reconnect

the cable after around 2 seconds. When the cable is

quickly reconnected, the power may not be supplied

from the PoE device.

Fixing screw

(M3, accessory)

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 35 36

Comentarios a estos manuales

Sin comentarios

Panasonic WV-SC386 Guía de instalación Pagina 18

Comentarios a estos manuales

Relacionado con productos y manuales para Cámaras De Seguridad Panasonic WV-SC386