Panasonic PTLB20NTU Manual de usuario descargar pdf (Pagina 12)

Computer operations

Turn on the computer.

Select [Start]

→

[Programs]

→

[Panasonic Wireless

Display]

→

[Wireless Manager mobile edition 2.0].

Wireless Manager ME 2.0 starts up, and the connection select window shown

below appears.

Select the connection and click [OK].

The launcher shown below appears and the connection with the projector is

established.

Simple Wireless Connection (Using the Initial Settings) (cont.)

Notes:

• The initial network number for both the projector and the computer is “1”.

These numbers must match for the connection.

Also, WEP is enabled when network number is anything but “1”, so when security

is a concern, use a different number than “1”.

Image and audio data are encrypted using AES in all networks, so essential data

are protected.

• Depending on the computer and wireless card used, automatic setup may not be

possible. If this is the case, the [Network] setting on the screen in step 2 above will

be switched to [USER] automatically. For details of the connection procedure, first

close Wireless Manager ME 2.0, and then refer to page 32.

• When anti-virus software and utilities for network cards are installed, these may

prevent connection of the projector. (See pages 51 to 53)

For multiple transmissions,

refer to page 23.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 56 57

Sin comentarios

Panasonic PTLB20NTU Manual de usuario Pagina 12