Panasonic HDCSD5 Instrucciones de operaciones Pagina 54

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 136
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 53
54
VQT1H64
Recording
When [FLASH AUTO] is set, the ambient
brightness is automatically detected, and the
flash will activate only when necessary. (If the
flash is not necessary, the [ßA] indicator will
not appear when the PHOTO SHOT button is
pressed halfway.)
This function’s default setting is
[FLASH AUTO].
3 Press the PHOTO SHOT button.
The flash is activated and the picture will be
recorded.
When the flash is not used
Set the flash to [FLASH OFF].
Do not block the flash with your hand or by
other means.
The unit automatically determines if the flash is
necessary even when it has been set to
[FLASH OFF] by detecting the ambient
brightness. (If it determines that the flash is
necessary, the [ ] indication lights up in red
when the PHOTO SHOT button is pressed
halfway.)
If the [ß] indication etc. flashes or is not
displayed when the PHOTO SHOT button is
pressed halfway, the flash is not activated.
The available range of the flash is approx. 1 m
to 2.5 m in dark places. Pictures will appear
dark or reddish when they are recorded by
using the flash at distances greater than 2.5 m.
Using the flash fixes a shutter speed of 1/750
or faster to 1/500.
The picture may become out of focus in dark
places. If so, adjust the focus manually.
The picture may appear dark if the flash is lit in
front of a white background.
A conversion lens (optional) can block the flash
and may cause a vignetting effect.
Do not use the flash with the ND filter (optional)
attached.
Set the flash to [FLASH OFF] where using a
flash is prohibited.
If the flash will be activated a large number of
times, it may take longer to charge it.
Reduces the phenomena where human eyes
become red from flashes.
Press the MENU button, then select
[PICTURE]
# [RED EYE] # [ON] and
press the cursor button.
To cancel the red eye reduction function
Press the MENU button, then select [PICTURE]
# [RED EYE] # [OFF] and press the cursor
button.
The flash is activated 2 times. Do not move
until the second flash is finished.
Use this when you take pictures of people in
dark places.
Red eye phenomenon may appear depending
on the recording conditions.
Press the MENU button, then select
[PICTURE] > [FLASH LEVEL] #
desired item and press the cursor
button.
[ßj]: If the brightness is too high.
[ßd0]: In normal recording
[ßi]: If the brightness is insufficient.
Red eye reduction function
To adjust the brightness of the
flash
HDCSD5-VQT1H64_eng.book 54 ページ 2007年8月1日 水曜日 午後7時16分
Vista de pagina 53
1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 135 136

Comentarios a estos manuales

Sin comentarios