Panasonic Arbitrator 360 Instrucciones de operaciones descargar pdf (Pagina 11)

E-10

ENGLISH

Installation (continue)

To Mount the P2 drive in a Personal Computer 5-inch Bay

1 Turn OFF the personal computer’s power.

2 Undo the six screws and remove the cover.

3 Mount the P2 drive in a 5-inch bay on the

personal computer. Use the screws supplied

with the P2 drive for mounting.

Please refer to your computer’s

instruction manual for guidance in

mounting to 5-inch bay drives.

<Notes>

z The P2 drive may not be able to be

fastened securely in some types of

personal computers.

z If all 5-inch bays are occupied, you will

need to remove one of the built-in drives to

make room for the P2 drive.

z The P2 drive should be used in a personal

computer whose design allows the front

panel of the Drive to be manipulated.

4 Plug a USB 2.0 cable B connector into the

USB connector on the P2 drive. then plug the

other end of the USB 2.0 cable into the USB

2.0 port on the personal computer.

<Note>

USB 2.0 connector pinouts vary according to

the type of motherboard type. Check your

computer’s instruction manual before

purchasing a commercially available USB

2.0 cable (shielded).

5 Connect the P2 drive to the internal power

cable (4 pins) of the personal computer.

USB 2.0

DC IN 16V

DC IN 12V

IEEE 1394b

Holes for securing the screws

(the other side is the same.)

USB 2.0 connector

USB 2.0

DC IN 16V

DC IN 12V

IEEE 1394b

USB 2.0

DC IN 16V

DC IN 12V

IEEE 1394b

Power cable

AJ-PCD20G(VQT0X89-2).book 10 ページ２００８年９月３日　水曜日　午前１１時４９分

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 51 52

Comentarios a estos manuales

Sin comentarios

Panasonic Arbitrator 360 Instrucciones de operaciones Pagina 11

Comentarios a estos manuales

Relacionado con productos y manuales para No Panasonic Arbitrator 360