Panasonic WJ-GXE100 Guía de instalación descargar pdf (Pagina 20)

IMPORTANT:

•TheRS485portofthisunitisintendedforusewith4-linecommunications.

When connecting 2-line communication devices, make connections as shown in the fol-

lowing illustration.

2-line

4-line

TARB

Twisted-pair cable (RS485, 2-line)

•Whenmakingconnectionswith2-linecommunications,select“2-line”inthesetupmenu.

Refer to the Operating Instructions on the provided CD-ROM for further information about

the setup menu.

•ThestatusoftheRS485portisalwaysterminated.

•MakeconnectionssothatexcessiveforceisnotappliedtotheBNCcoaxialcableorthe

twisted-pair cable when they are connected.

•Themaximumtwisted-paircablelengthis1200m{3937feet}.

c Connect a LAN cable(category 5 or better, straight,STP*) to the network connectoron the

unit.

*Emodelonly

LAN cable (category 5 or

better, straight, STP*)

v Connect the power cord.

IMPORTANT:

•The12VDCpowersupplyshallbeinsulatedfromthecommercialACpower.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 31 32

Sin comentarios

Panasonic WJ-GXE100 Guía de instalación Pagina 20