Panasonic WJ-GXE100 Guía de instalación descargar pdf (Pagina 19)

Connection

Caution:

 • ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY (UL 1310/CSA 223) or LIMITED

POWER SOURCE (IEC/EN/UL/CSA 60950-1).

 • A READILY ACCESSIBLE DISCONNECT DEVICE SHALL BE INCORPORATED TO THE

EQUIPMENT POWERED BY 12 V DC POWER SUPPLY.

Before starting the connection, turn off the power of the unit and the devices to be connected.

Check and prepare the required devices and cables for connection.

z Connect the BNC coaxial cable to the video input connector on the unit.

Connected to cameras

or other devices

IMPORTANT:

•ThemaximumBNCcoaxialcablelengthis500m{1640feet}whenusinga5C-2Vcable

and 400 m {1312 feet} when using RG-59/U, BELDEN 9259 or equivalent.

x Connect a twisted-pair cable to the RS485 port.

When connecting an external device, remove 9 mm - 10 mm

{11/32 inches - 13/32 inches} of the outer jacket of the cable

and twist the cable core to prevent the short circuit first.

Specification of cable (wire):

22 AWG - 28 AWG, Single core, twisted

 *Checkwhetherthestrippedpartofthewireisnotexposed

and is securely connected.

Receive

Transmit Receive

Connected device

Twisted-pair cable

Signal Signal

Transmit

WJ-GXE100

9 mm - 10 mm

{11/32 inches -

13/32 inches}

Strip range

Receive

Transmit

TB TARB RA

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

Sin comentarios

Panasonic WJ-GXE100 Guía de instalación Pagina 19