Panasonic WV-SW138 Guía de instalación descargar pdf (Pagina 27)

Troubleshooting

Before asking for repairs, check the symptoms with the following table.

Contact your dealer if a problem cannot be solved even after checking and trying the solution in the

table or a problem is not described below.

Symptom Cause/solution

Reference

pages

Power is not turned on.

• Are the PoE device and the network

connector on the rear of the camera

connected using a LAN cable?

 Check whether the connection is

appropriately established.

• Depending on the PoE device, the

power supply will stop when the

demanded power exceeds its total

power limit for all PoE ports.

 Refer to the operating instructions of

the PoE device in use.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32

Sin comentarios

Panasonic WV-SW138 Guía de instalación Pagina 27