Panasonic WV-SW138 Guía de instalación descargar pdf (Pagina 16)

Preparations

You can install the camera on a ceiling or a wall. ( Pages 16 and 17)

IMPORTANT:

• Procure 3 screws (M4) to secure the camera to a ceiling or a wall, according to the material of

the installation area. In this case, wood screws and nails should not be used. For mounting a

camera on a concrete ceiling, use an anchor bolt (for M4) or an AY plug bolt (M4) for securing.

(Recommended tightening torque: 1.6 N·m {1.18 lbf·ft})

• Required pull-out capacity of a single screw/bolt is 196 N {44 lbf} or more.

• If a ceiling board such as plaster board is too weak to support the total weight, the area shall

be sufficiently reinforced.

The mounting conditions of the camera are described as follows:

Installation

place

Recommended

screw

Number of

screw

Minimum pull-out

strength (per 1 pc.)

Ceiling/wall (Direct mounting) M4 3 pcs. 196 N {44 lbf}

Using the side cable access hole

When installing the camera directly on the ceiling or wall with cables exposed, cut out a portion of

the enclosure to open a cable access hole.

Side cable access hole

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

Sin comentarios

Panasonic WV-SW138 Guía de instalación Pagina 16