Panasonic WV-SF342 Guía de instalación descargar pdf (Pagina 32)

Vertical position (Tilting)

Loosen the tilting lock screws (x2), and rotate

the tilting table to adjust the tilting direction.

(Adjustablerange:±75°)Sinceavariablefocal

lens is used, it is possible to change the angu-

lar field of view. This lens can also be rotated in

the reverse direction, but the image azimuth is

reversed. In this case, the image azimuth can

be modified when the panning table is rotated

to the direction of clockwise panning (180 °).

Horizontal: 27.7 ° (TELE) to 100.3 ° (WIDE)

Vertical: 20.8 ° (TELE) to 73.5 ° (WIDE)

After adjustment, tighten the tilting lock screws (x2) to fix the tilting table.

(Recommended tightening torque: 0.59 N·m {0.44 lbf·ft})

Note:

 • Whenthetiltingtableisturnedto theedge ofthe adjustablerange(±75°),it mustbe noted

that the shadow of the dome cover may be projected.

Image tilt adjustment

Rotate the azimuth adjustment ring to adjust the azimuth angle of the image. (Adjustable range:

±100°)

FRONT

TOP

MONITOR

OUT

LOCK

12V=IN

BASE-T/

BASE TX

EXT

–100 °

+100 °

Adjustable range

+75 °

–75 °

Adjustable range

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 47 48

Sin comentarios

Panasonic WV-SF342 Guía de instalación Pagina 32