Panasonic WV-SF342 Guía de instalación descargar pdf (Pagina 28)

Important:

 • Besuretousethepowercordplugprovidedwiththisproduct.

 • Besuretofullyinsertthepowercordplug(accessory)intothe12VDCpowersupplyterminal.

Otherwise, it may damage the camera or cause malfunction.

 • BesuretouseanACadaptorcompliantwiththeSpecificationsregardingpowersourceand

power consumption. (☞ Page 43)

t Run the 12 V DC output cable through the gap of the cable hook.

12V=IN

12 V DC output cable

Cable hook

When using PoE (IEEE802.3af compliant)

Connect a LAN cable (category 5 or better, straight, STP*) between a PoE device (such as a hub)

and the network connector of the camera.

* PAL models only

Important:

 • Useall4pairs(8pins)oftheLANcable.

 • Themaximumcablelengthis100m{328feet}.

 • MakesurethatthePoEdeviceinuseiscompliantwithIEEE802.3afstandard.

 • Whenconnectingboththe12VDCpowersupplyandthePoEdeviceforpowersupply,PoE

will be used for power supply.

 • WhendisconnectingtheLANcableonce,reconnectthecableafteraround2seconds.When

the cable is quickly connected, the power may not be supplied from the PoE device.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 47 48

Sin comentarios

Panasonic WV-SF342 Guía de instalación Pagina 28