
Advanced Operations
4746
Title Procedure Remarks, etc.
CAMERA FUNCTIONS
PRESS MENU TO EXIT
1.
CAMERA SETUP
2.
DIGITAL EFFECT
3.
CARD SETUP
4.
MULTI-PICTURES
5.
RECORDING SETUP
6.
DISPLAY SETUP
7.
OTHER FUNCTIONS
8.
DEMO MODE
SCAN MODE
SPEED FAST NORMAL SLOW
RETURN ---- YES
STROBE MANUAL
SWING OFF ON
P-IN-P 1 2 3 4
MULTI-PICTURES
PRESS MENU TO EXIT
MULTI/P-IN-P
MENU
PUSH
W.B/SHUTTER/IRIS/VOL/JOG
12
Recording with Special Effects
(Digital Effects) (Continued)
∫ Manual Multi-Picture Mode
With this function, you can capture up to 9 small still
pictures and display them together on the same
screen.
1
After setting [EFFECT1]
on the [DIGITAL
EFFECT] Sub-Menu to
[MULTI]... (p. 52)
Press the [MENU]
Button.
2
Turn the [PUSH] Dial to
select [MULTI-
PICTURES] and then
press the [PUSH] Dial.
The [MULTI-PICTURES]
Sub-Menu appears.
3
Turn the [PUSH] Dial to
select [SCAN MODE]
and then press the
[PUSH] Dial to select
[MANUAL].
Making All Multi-
Pictures Disappear
After displaying 9
pictures, it is possible to
make them disappear in
one go by pressing the
[MULTI] Button.
4
Press the [MENU]
Button to exit the
Menu.
Displaying the Multi-
Pictures Again
Press the [MULTI] Button
for more than 1 second.
Notes for Using the Multi-Picture Mode
≥It is not possible to use the Multi-Picture Mode when
[PROGRESSIVE] on the [CAMERA SETUP] Sub-
Menu is set to [ON].
≥The Multi-Picture Mode cannot be used while the
Ditigal Still Picture Mode is used.
≥The Multi-Picture Mode cannot be used during the
Mega-Pixel Setting. (p. 82) (NV-MX5, NV-MX7 only)
≥When using the Mirror Mode (p. 31) with the LCD
Monitor facing forward, pressing the [MULTI] Button
displays the still pictures starting at the top right
corner of the screen.
≥The quality of the pictures recorded in the Multi-
Picture Mode is slightly inferior.
≥To record the displayed still pictures in the Multi-
Picture Mode onto the tape, press the Recording
Start/Stop Button or the [PHOTO SHOT] Button.
Erasing the Multi-Pictures One by One
While the multi-pictures are displayed, press the
[MULTI] Button for more than 1 second.
≥This erases the last captured picture. Keeping the
[MULTI] Button pressed erases the pictures
continuously.
≥After you have erased the still pictures one by one, it
is not possible to display them again.
5
Press the [MULTI] Button once, and then again for
each of the scenes that you want to capture in the
Multi-Picture Mode.
MENU
12
12
MENU
MULTI/P-IN-P
MULTI/P-IN-P
Comentarios a estos manuales