Panasonic WJ-NV300 Guía de instalación descargar pdf (Pagina 33)

Step 4

Insert the HDD bracket with the hard disk drive all the way

into the HDD slot, and secure the HDD bracket with the

screws removed in Step 2.

HDD bracket screw

Replace the hard disk drives

When replacing a hard disk drive with another one, it is necessary to perform the removal process. In this case, do the following.

Step 1

Perform the removal process of the hard disk drive.

(☞ Operating Instructions (PDF))

Step 2

Turn off the power of the recorder. (☞ Page 35)

Step 3

Pull out the HDD bracket from the rear panel of the recorder

by referring to Step 2 of "Install the hard disk drives"

(☞ page 32).

Step 4

Install the hard disk drive into the HDD bracket by referring

to Step 3 of "Install the hard disk drives" (☞ page 32).

Step 5

Install the hard disk drive into the HDD bracket by referring

to Step 3 of "Install the hard disk drives" (☞ page 32).

Step 6

Turn on the power of the recorder. (☞ Page 34)

New hard disk drive will be formatted automatically.

When the formatting is completed, the hard disk drive

will become operable.

When the hard disk drive is formerly used for recording,

perform the link process (☞ Operating Instructions

(PDF)) on the "HDD management" page.

The status of hard disk drive can be checked on the

setup menu - the "Maintenance" page - the "HDD infor-

mation" tab. (☞ Operating Instructions (PDF))