Panasonic KXMC6040 Instrucciones de operaciones Pagina 19

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 24
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 18
3. Help
19
Detailed operating instructions are on the CD-ROM, or can be viewed at www.panasonic.com/help
Out of Paper Input Tray
#1
L Recording paper is not installed or the paper input tray has run out of paper.
Install paper.
L Recording paper was not fed into the unit properly. Reinstall the paper.
Note:
L #1: Standard input tray
L #2: Optional input tray
L #1+#2: Standard input tray and optional input tray
Paper Jammed L A recording paper jam occurred. See the other displayed message
instructions to remove the jammed paper.
PC Fail or Busy. L The cable or the computer power cord is not connected correctly. Check the
connections.
L The software is not running on the computer. Restart the software and try
again.
Please Wait L The unit is warming up. Wait for a while.
Redial Time Out L The other party’s fax machine is busy or has run out of recording paper. Try
again.
Remove Document L The document is jammed. Remove the jammed document.
L Attempted to send or copy a document longer than 600 mm (23
5
/
8
") using
the automatic document feeder. Press {Stop} to remove the document.
Divide the document into two or more sheets and try again.
RX Memory Full L The memory is full of received documents due to a lack of recording paper
or a recording paper jam. Install paper or remove the jammed paper.
L If feature #442 is set to Always,
check the connection between the computer and the unit.
check the computer is turned ON.
L If feature #448 is set to On,
view, print or save the received fax documents, and then erase the
unnecessary documents.
turn the setting to Off. The fax documents stored in memory will be
printed automatically.
set feature #449 to On, and then print the received fax documents.
Scanner Position Error L There is something wrong with the scanner position. Turn the power switch
OFF, then ON. If the problem cannot be solved, contact our service
personnel.
Self Calibration L The unit is changing the color calibration. Wait for a while.
Transmit Error L A transmission error occurred. Try again.
Toner Cartridge Not
Installed
L The toner cartridge is not installed. Install it.
Tray #2 Left Cover
Open
L The left cover of the optional input tray is open. Close it.
Waste Toner Not
Installed
Waste Toner Cartridge
Not Installed
L The waste toner cartridge is not installed. Install it.
Display Cause & Solution
MC6040-PNQW1437ZA-QRG-en.book Page 19 Wednesday, July 16, 2008 3:31 PM
Vista de pagina 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Comentarios a estos manuales

Sin comentarios