Panasonic KXMC6040 Instrucciones de operaciones Pagina 17

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 24
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 16
3. Help
17
Detailed operating instructions are on the CD-ROM, or can be viewed at www.panasonic.com/help
3HelpError Messages
3.1 Error messages – Display
If the unit detects a problem, one or more of the following messages will appear on the display.
Display Cause & Solution
Call Service L There is something wrong with the unit. Contact our service personnel.
Change Supplies Toner
Empty
Change Supplies Black
:Empty
L The toner cartridge life is finished. Replace the toner cartridge immediately.
Note:
L Black: Black toner
L Cyan: Cyan toner
L Magenta: Magenta toner
L Yellow: Yellow toner
Change Supplies Toner
Low
Change Supplies Black
:Low
L The toner cartridge life is near its end. Replace the toner cartridge as soon
as possible.
Note:
L Black: Black toner
L Cyan: Cyan toner
L Magenta: Magenta toner
L Yellow: Yellow toner
Change Supplies
Replace Waste Toner
Change Supplies
Replace Waste Toner
Cartridge
L The waste toner cartridge life is finished. Replace the waste toner cartridge
immediately.
Change Supplies Waste
Toner Full
L The waste toner cartridge life is near its end. Replace the waste toner
cartridge as soon as possible.
Check Document L The document was not fed into the unit properly. Remove the document,
and then press {Stop} to clear the message. Re-insert the document. If
misfeeding occurs frequently, clean the document feeder rollers and try
again.
Check Install Input
Tray #1
L The paper input tray is not installed correctly. Pull out the paper input tray
and re-insert it.
Note:
L #1: Standard input tray
L #2: Optional input tray
L #1+#2: Standard input tray and optional input tray
Check Paper L You are printing on envelopes. Check the standard input tray to be sure that
envelopes are installed, and then press {Black}/{Color}.
L The recording paper size is not the same as the size selected for copy.
Change the recording paper size setting (feature #380 or feature #382), and
install the appropriate recording paper.
L The recording paper size is not the same as the size selected when printing
from the PC. Change the recording paper size setting (feature #380 or
feature #382), and install the appropriate recording paper.
L The recording paper size is not the same as the size selected for receiving
a fax. Change the recording paper size setting (feature #380 or feature
#382), and install the appropriate recording paper.
Check Pick Up Input
Tray #1
L Recording paper was not fed into the unit properly. Re-insert the recording
paper.
Note:
L #1: Standard input tray
L #2: Optional input tray
MC6040-PNQW1437ZA-QRG-en.book Page 17 Wednesday, July 16, 2008 3:31 PM
Vista de pagina 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Comentarios a estos manuales

Sin comentarios