Panasonic PTL6500UL Manual de usuario descargar pdf

5.3. Canceling the service support mode

Press the MENU button on the main unit or the remote control unit.

6. Using the SERIAL Connector

SERIAL connector which is on the side interface panel of the projector conforms to

RS-232C standard. This projector can be controlled by a PC which is connected as

shown in "6.1. Connection".

For controlling this projector by a PC, requires communication software on the market,

and inputs control commands according to communication settings and basic format

below.

6.1. Connection

Note:

Use a proper communication cable which is suitable for the PC to connect SERIAL

connector and the PC.

6.2. Pin Layout and Signal Names for SERIAL Connector

6.2.1. SERIAL IN Terminal

1 2 3 4 5 6 7 8

Indice de contenidos

Pagina 1 - 6. Using the SERIAL Connector

5.3. Canceling the service support modePress the MENU button on the main unit or the remote control unit.6. Using the SERIAL ConnectorSERIAL connector

Pagina 2 - 6.3. Communication Settings

6.2.2. SERIAL OUT Terminal6.3. Communication Settings11

Pagina 3 - 6.5. Control / Query Commands

Signal Level Contents DescriptionSync. method Asynchronous Synchronizes every 1 character (8 bits)Baud rate Conforms to9 600 bps Data transfer speedPa

Pagina 4 - Control Commands

Control CommandsCommand Name (Parameter format is shown in < >)Function / Contents Call back from Projector (Parameter format is shown in < &

Pagina 5 - Query Commands

Command Name (Parameter format is shown in < >)Function / Contents Call back from Projector (Parameter format is shown in < >)Minimum Valu

Pagina 6 - Parameters

Query Command Contents Call back from Projector (Parameter format is shown in < >)Q$L :<hour> <acctch>QAM <off_on>QAS <aut

Pagina 7 - [Example]

Parameter Format Parameter Size (Byte) Parameter Definition<acctch> 4 Decimal notation without plus/minus sign: 0000 hour to 9999 hours<auto

Pagina 8 - 7. Using the WIRED Connector

6.6. Communication Cable Specifications6.7. Signal Selector Connecting Cable SpecificationsWhen connecting to a signal selector (ex. TW-SWS62J), use a