Panasonic PT-DS8500U Instrucciones de operaciones Pagina 80
- Pagina / 129
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
PROJECTOR SETUP menu
80
- ENGLISH
Settings
Details of error
z
Error message Remedial measure
[Exceed maximum
number of projectors.]
Limit number of
•
projectors in same group
to 8.
When linking 9 or
•
more projectors, use a
computer and the [Multi
Projector Monitoring &
Control Software].
[Please check the
COMMAND CONTROL
setting.]
Turn [ON] the
•
[COMMAND CONTROL]
on the on-screen menu
[NETWORK CONTROL]
for the projector with the
error display.
Set [COMMAND
•
PORT] of [NETWORK
CONTROL] of all linked
projectors to the same
value.
[Please check the
USER NAME and
PASSWORD in the
COMMAND CONTROL
setting.]
Set the [USER NAME]
•
and [PASSWORD] for the
administrator authority for
[WEB CONTROL] of all
the linked projectors to
the same text string.
[Cannot apply
BRIGHTNESS
CONTROL. Please
check projector status.]
Projector is in standby
•
state. Turn on power.
[Brightness Sensor
Error]
There is a fault in the
•
brightness sensor. If the
fault is not corrected by
turning the power off and
back on, consult your
dealer.
Note
If the linked projectors are not listed, check the following.
z
The devices on the network all have different IP
•
addresses.
The LAN cable is connected correctly.
•
(
Æ
page 95)
The sub-nets of the projectors are the same.
•
The [LINKS] are set in the same group.
•
For changing the projector name, refer to
z
“NETWORK
SETUP” of “NETWORK menu” (
Æ
page 94) or “
■
Network
cong page” (
Æ
page 106).
When [MODE] of brightness control is
Q
set to [PC]
The name of this projector is displayed.
The state is indicated by color.
GREEN : The brightness can be corrected by a
signicant margin.
YELLOW : The brightness can no longer be
corrected by a signicant margin.
RED : There is an error in brightness control.
J
Example of adjustment procedure
for brightness control
The following is an example of adjustment procedure
for linking the brightness of 8 projectors that form a
network.
Connect all the projectors to the hub 1 )
using the LAN cables. (
Æ
page 95)
Turn on the power in all projectors.2 )
Ensure [LAMP SELECT] of all the 3 )
projectors are either all set to [DUAL]
or all set to [SINGLE].
Set [MODE] of [BRIGHTNESS 4 )
CONTROL SETUP] to [OFF], and
select [APPLY].
Set [SUBNET MASK] of all the 5 )
projectors to the same value and set
their [IP ADDRESS] to different values
so that network communication can
be performed.
Wait at least 8 minutes until the lamp 6 )
power stabilizes.
Set all the items in the [PICTURE] 7 )
menu of all the projectors to the same
value.
To match the color, adjust [COLOR 8 )
MATCHING].
RETURN
MENU
MODE PC
PROJECTOR2
BRIGHTNESS CONTROL STATUS
- Operating Instructions 1
- PT-DZ8700U 1
- PT-DS8500U 1
- PT-DW8300U 1
- Important Safety Notice 2
- Heightened luminance 4
- Lengthened lamp 4
- Reduced standby power 4
- Contents 5
- Maintenance 7
- Appendix 7
- - ENGLISH 10
- Cautions when transporting 11
- Cautions when installing 12
- ENGLISH 13
- Security 14
- Cautions on use 14
- Cleaning and maintenance 15
- Disposal 15
- Accessories 16
- About Your Projector 17
- Projector body 18
- Setting projector ID number 20
- Using a wired remote control 20
- Setting up 21
- Connections 34
- How to remove the projection 37
- Powering ON/OFF 38
- Powering up the projector 39
- Making adjustment and 39
- Powering off the projector 40
- Direct power off function 40
- Projecting 41
- Using the SHUTTER function 46
- On-screen display function 46
- Switching the input signal 46
- STATUS function 46
- Automatic adjustment 47
- Using the FUNCTION button 47
- Displaying the internal 47
- Changing the picture aspect 48
- Menu Navigation 49
- MAIN MENU 50
- SUB MENU 50
- PICTURE menu 52
- CONTRAST 53
- BRIGHTNESS 53
- COLOR TEMPERATURE 54
- SYSTEM DAYLIGHT VIEW 55
- SHARPNESS 56
- NOISE REDUCTION 56
- DYNAMIC IRIS 56
- (PT-DZ8700U/PT-DS8500U only) 57
- POSITION menu 58
- (PT-DZ8700/PT-DS8500 only) 60
- (PT-DW8300 only) 62
- ADVANCED MENU 63
- INPUT RESOLUTION 64
- CLAMP POSITION 64
- EDGE BLENDING 64
- FRAME DELAY 66
- RASTER POSITION 66
- DISPLAY LANGUAGE menu 67
- DISPLAY OPTION menu 68
- (PT-DZ8700 only) 70
- AUTO SIGNAL 71
- AUTO SETUP 71
- (Only RGB input) 72
- BACK COLOR 74
- STARTUP LOGO 74
- PROJECTOR SETUP menu 75
- COOLING CONDITION 76
- LAMP SELECT 76
- LAMP RELAY 76
- LAMP POWER 77
- BRIGHTNESS CONTROL 77
- STANDBY MODE 81
- SCHEDULE 81
- NO SIGNAL SHUT-OFF 84
- REMOTE2 MODE 84
- FUNCTION BUTTON 84
- DATE AND TIME 84
- LENS CALIBRATION 85
- FILTER COUNTER RESET 85
- LOAD ALL USER DATA 86
- INITIALIZE 86
- SERVICE PASSWORD 86
- SAVE ALL USER DATA 86
- P IN P menu 87
- TEST PATTERN menu 88
- SIGNAL LIST menu 89
- Managing the sub memory 90
- SECURITY menu 91
- DISPLAY SETTING 92
- TEXT CHANGE 92
- MENU LOCK 92
- MENU LOCK PASSWORD 92
- CONTROL DEVICE SETUP 93
- Network connections 95
- NETWORK menu 100
- Monitor Lamp indicators 107
- Replacement 109
- Troubleshooting 112
- Technical Information 114
- Control commands via LAN 115
- Serial terminal 117
- REMOTE 2 IN terminal 120
- List of compatible signals 122
- Specications 124
- Dimensions 126
- About brand 126
- Attachment procedure 127
- ヱㄏㄔㄐㄏㄊチヤㄐㄓㄑㄐㄓㄕㄊㄐㄏ 129
Relacionado con productos y manuales para Proyectores de datos Panasonic PT-DS8500U
(74 paginas)
(62 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.042 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales