Panasonic CU-3E19RBU-5 Manual de instalación

© Panasonic Corporation 2015 Order No: PAPAMY1505100CE Air Conditioner Outdoor UnitCU-3E19RBUCU-4E24RBUDestinationU.S.A.CanadaPlease file and use this

36 10.2 CU-4E24RBU 10.2.1 Select The Best Location If an awning is built over the unit to prevent directsunlight or rain, be careful that heat radia

37 Outdoor Unit Installation Guidelines  Where a wall or other obstacle is in the path of outdoor unit’s intake or exhaust airflow, follow the instal

38 CUTTING AND FLARING THE PIPING 1.Please cut using pipe cutter and then remove the burrs.2. Remove the burrs by using a reamer. If burrs are not rem

39 10.2.5 Connect The Cable To The Outdoor Unit 1. Remove Plugs.2. Fix the conduit connectors to the knock outholes with lock-nuts, then secure them.

40 10.2.6 Heat Insulation Use a material with good heat-resistant properties as the heat insulation for the pipes. Be sure to insulate both the gas-si

APPLICABLE INDOOR UNITSCU-3KS19NBUCU-4KS24NBUCU-4KS31NBUMulti-Outdoor UnitIndoor Unit3-Room4-Room4-RoomCS-MKS7NKUYESYESYESYESYESYESYESYESYESYESYES

29 9. Installation Information9.1 CU-3E19RBU9.1.1 Check PointsAllowableelevation:15 m (49.2 ft) max.elevation betweenThe allowableeach of the indoorun

30 9.2 CU-4E24RBU 9.2.1 Check Points Allowableelevation:15 m (49.2 ft) max.elevation betweenThe allowableeach of the indoorunits and betweenthe indoor

31 10. Installation Instruction10.1 CU-3E19RBU10.1.1 Select The Best Location If an awning is built over the unit to prevent directsunlight or rain,

32 Outdoor Unit Installation Guidelines  Where a wall or other obstacle is in the path of outdoor unit’s intake or exhaust airflow, follow the instal

33 CUTTING AND FLARING THE PIPING 1.Please cut using pipe cutter and then remove the burrs.2. Remove the burrs by using reamer. If burrs is not remove

34 10.1.5 Connect The Cable To The Outdoor Unit 1. Remove Control Board Cover (Metal) byloosening 2 screws.2.Remove Valve Cover (Metal) by loosening

35 10.1.6 Heat Insulation Use a material with good heat-resistant properties as the heat insulation for the pipes. Be sure to insulate both the gas-si