Panasonic WV-TW310 Guía de instalación descargar pdf (Pagina 28)

Troubleshooting

Before asking for repairs, check the symptoms with the following table.

Contact your dealer if a problem cannot be solved even after checking and trying the solution in the

table or a problem is not described below.

Symptom Cause/solution

Reference

pages

Power is not turned on.

When using DC power supply

• Is 12 V DC power supply connected to

the power supply terminal?

→ Check whether the connection is

appropriately established.

• Is the AC adaptor in use compliant with

the Specifications?

→ Check the Specifications regarding

AC adaptor.

When using a PoE device for power

supply

• Are the PoE device and the network

connector on the rear of the camera

connected using a LAN cable (4-pair)?

→ Check whether the connection is

appropriately established.

• Depending on the PoE device, the

power supply will stop when the

demanded power exceeds its total

power limit for all PoE ports.

→ Refer to the operating instructions of

the PoE device in use.

Camera search cannot

be performed with

Panasonic "IP Setting

Software".

Click "Services and Applications", select

"Wearable Camera Agent" under

"Services", and then right click and select

"Stop". After using Panasonic "IP Setting

Software", follow the above procedure to

select "Wearable Camera Agent", and

then right click and the select "Start".

1 2 ... 23 24 25 26 27 28 29 30 31 32

Sin comentarios

Panasonic WV-TW310 Guía de instalación Pagina 28