Panasonic WV-CF600 Guía de instalación descargar pdf (Pagina 21)

•Subjectwithlargeilluminancechange

•Subjectwithlowilluminance

•Toobrightorreflectivesubject

•Subjectthroughawindow

•Placewherethelenseasilybecomesdirty

•Subjectwithlesscontrastsuchaswhitewall

•Subjectwithremarkabledepth

•Subjectwithheavyflicker

•Subjectwithhorizontallyparallellinessuchasashutter

<AdjustmentonWV-CF634>

1 Loosen the zoom knob and adjust to the best view angle between TELE and WIDE.

Note:

•Thefocusmaynotbeadjustedsmoothlywhenthezoomadjustmentringisextremelycloseto

the end of W direction (T direction). At this time, slightly adjust the zoom adjustment ring

towards the T direction (W direction), and then adjust the focus.

2 Tighten the zoom knob.

3 Rotate the front of the lens, and make coarse adjustment of the focus between NEAR and FAR.

4 Press the [AF] button on the side of the camera, which will automatically focus.

Note:

•TheAFfunction isnotavailableover theentirefocusrange.Besuretoperformapproximate

adjustment of the view angle before manual focusing, and then press the [AF] button to enable

the AF function.

•Forthefollowingsubjects,selectELCcontrolmethod,andthenmanuallyadjustthefocus.

•Fast-movingsubject

•Subjectwithsignificantilluminancechange

•Subjectwithlowilluminance(suchashighbeamlight)

•Toobrightorreflectivesubject

•Subjectbehindawindow

•Lesscontrastysubject(suchaswhitewall)

•Subjectwithremarkabledepth

•Subjectwithflicker

•Subjectwithparallellines(suchasashutter)

•Blurredordirtysphericalcover

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 31 32

Sin comentarios

Panasonic WV-CF600 Guía de instalación Pagina 21