Panasonic WV-CF304L Instrucciones de operaciones descargar pdf (Pagina 15)

Note:

 •

CW324L

CW314L

CW304L

CF314L

CF304L

CW324L

CW314L

CW304L

CF314L

CF304L

CW324L

CW314L

CW304L

CF314L

CF304L

When “ALC/ELC” is set to “ELC” or “ALC+”, only the AUTO mode is enabled.

 •

CW324L

CW314L

CW304L

CF314L

CF304L

CW324L

CW314L

CW304L

CF314L

CF304L

CW324L

CW314L

CW304L

CF314L

CF304L

When “SHUTTER” is set to options other than “OFF”, the electronic sensitivity enhancement setting cannot be

performed and “---” appears.

 • Whenthemagnificationof “SENSUP” isincreased,thescreenbecomescoarser, more whitish,ormoreflawed.However, this

phenomenon is normal.

6. White balance setting [WHITE BAL]

The white balance adjustment is selectable from the following.

ATW1 (default): Activates the automatic color temperature tracking mode.

The camera continuously check the color temperature of the light source and automatically adjusts the white

balance. The adjustment of the color temperature ranges from approx. 2700 K to 6000 K.

ATW2: Activates the sodium lamp automatic color temperature tracking mode. The camera automatically achieves an optimal white

balance under the sodium lamp. The adjustment of the color temperature ranges from approx. 2000 K to 6000 K.

AWC: Activates the automatic white balance control mode. This adjustment is suitable for a location where a light source is stable.

The adjustment of the color temperature ranges from 2000 K to 10000 K. When “AWC” is selected, the white balance needs

to be adjusted.

Note:

 • Ifthesituationmeetsoneofthefollowings,colormaynotbeaccuratelyreproduced.

• Thesubjectismostlyhighly-colored.

• Thephotographicsceneisunderthebrightblueskyoratnightfall.

• Theilluminationofthelightilluminatingthesubjectisinsufficient.

When “AWC” is selected, follow the steps below to adjust the white balance.

“CAMERA SETUP” screen

**CAMERA SETUP**

SCENE1

ALC/ELC ALC

SHUTTER OFF

AGC ON(LOW)

SENS UP OFF

WHITE BAL AWC PUSH SET

DNR HIGH

AUTO2

VMD OFF

RET TOP END

D&N(IR)

Step 1

Set “WHITE BAL” to “AWC” and press the [LEFT] button to change to “AWC

→

PUSH SET”.

Step 2

Press the [SET] button and adjust the white balance. “AWC

→

PUSH SET” is reversely highlighted during adjustment. When the

reversely highlighted display is restored, the white balance adjustment is completed.

Step 3

Press the [RIGHT] button to select “AWC”. Refer to this page for fine adjustment of the white balance.

Note:

 • Theadjustmentofthecolortemperaturerangesfromapprox.2000Kto10000K.Iftherangeisoutofthisadjustmentrangeor

lighting directed to a subject is too dark, the white balance may not be adjusted. In such a case, “AWC → PUSH SET” stays

reversely highlighted.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 28 29

Comentarios a estos manuales

Sin comentarios

Panasonic WV-CF304L Instrucciones de operaciones Pagina 15

Comentarios a estos manuales

Relacionado con productos y manuales para Cámaras De Seguridad Panasonic WV-CF304L