Panasonic WV-SW314 Guía de instalación descargar pdf (Pagina 20)

Secure the camera to the camera mount bracket

The tilt angle is locked downward at shipment.

z Loosen the tilting lock screw approx. 1 rotation and adjust the tilt angle of the camera to the

horizontal position.

x Tighten the tilting lock screw again after tilt angle adjustment.

Note:

 • Useahexagonalwrenchwithwidthacrossflatsof4mm(locallyprocured)toloosenortighten

the tilting lock screw.

Tilting lock screw

Camera main body

Approx. 90°

Horizontal

c Pass each cable and the safety wire through the camera mount bracket, and secure the cam-

era to the camera mount bracket with the camera fixing screws x3 (accessory).

Pass the network cable first through the camera mount bracket before passing through the

other cables.

IMPORTANT:

 • Ensurethatthecamerafixingscrews(accessory)arefirmlysecured.

Recommended tightening torque: 0.78 N·m {0.58 lbf·ft}

Safety wire

Network cable

Camera mount bracket

Camera main body

Camera xing screw x3 (M4 x 8)

(accessories)

Camera mount bracket

Drain slit

Cable clamp

Video output cable

Mounting boss for safety wire

Installations / Connections

(This illustration represents WV-SW316.)

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 49 50

Sin comentarios

Panasonic WV-SW314 Guía de instalación Pagina 20