Panasonic WV-SF332 Guía de instalación descargar pdf (Pagina 28)

Installation

Camera mounting

Installation shall be conducted after turning off each device.

z Detach the dome cover. (☞ Page 18)

x Connect the cables to the camera. (☞ Pages 23 to 27)

As necessary, use a cable tie (accessory) to assemble the cables.

c Mount the camera. (The illustration represents the case in which a two-gang junction box is

installed.)

 • Fixthecamerawith4screws(M4,locallyprocured)

FRONT

TOP

EXT I/O

AUDIO

OUT

MIC

LINE IN

10BAS

100BA

12V=IN

MONITOR

OUT

Direction marker for installation

Two-gang junction box

Screws

(locally procured)

Important:

 • Whentighteningthescrews,becarefultoensurethatthecablesdoesnottanglethecables.

Note:

 • Forceilingmounting

"gFRONT" of direction marker for installation indicates the center of panning. Adjustment of

lens direction will become easier when the camera is mounted with the "gFRONT" marker ori-

ented to the desired shooting area. Refer to the "Adjustment" section (☞ pages 29 to 33) for

further information about adjustment.

 • Forwallmounting

The camera shall be mounted with the "gFRONT" marker facing upward.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 43 44

Sin comentarios

Panasonic WV-SF332 Guía de instalación Pagina 28