Panasonic WV-SC588 Guía de instalación descargar pdf (Pagina 25)

Detach the camera

The camera is fixed on the camera mount bracket using the fixing screw. Remove the camera by following the instructions

below.

IMPORTANT:

 • Donotdetachthecamerainadifferentwayfromtheonedescribedbelow.Itmaydamagethecamera.

Step 1

Detach the decorative cover from the camera by following

step 10 of the “Wire through a hole in the ceiling” section

in the reverse order (☞ pages 22-23).

q Turn the decorative cover by approx. 16 ° in the direc-

tion of the arrow (counterclockwise) as illustrated

while pushing down the locking arm, and pull it slight-

ly down from the ceiling.

w Turn the decorative cover a further 16 ° in the direc-

tion of the arrow (counterclockwise) as illustrated, and

then remove the decorative cover.

IMPORTANT:

 • Hold the decorative cover with both hands when

removing it. The cover will fall from the camera when

the hook is disengaged from the groove.

Step 2

Detach the 12 V DC power cable plug (accessory) or the

LAN cable from the camera, and then turn off the power

of the camera.

Step 3

Remove the fixing screw (M3, accessory) that is fixing the

camera on the camera mount bracket (accessory).

Do not lose the fixing screw.

Approx. 20 °

Step 4

Rotate the camera counterclockwise to detach the cam-

era from the camera mount bracket (accessory).

IMPORTANT:

 • Whendetachingthecamerafromthecameramount

bracket, hold the fixed section of the unit. Detaching

the camera while holding the dome section may result

in malfunction.

Step 5

Disconnect the remaining cables from the camera.

Step 6

Detach the safety wire from the camera.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 39 40

Sin comentarios

Panasonic WV-SC588 Guía de instalación Pagina 25