Panasonic WV-CW590 Guía de instalación descargar pdf (Pagina 19)

Important:

• Joint both sides of the front and rear sunshields

before fitting in the main sunshield.

• Do not trap the safety wire inside.

• The safety wire is designed to support only the

weight of the camera when the camera falls.

Do not put an excessive weight that the safety

wire cannot support.

STEP 9

Fit the front and rear sunshields in the main sunshield.

• Align "

" of the rear sunshield to " START" of the

main sunshield. Then, turn the front and rear

sunshields toward "LOCK" until a click is heard.

Front and rear sunshields (accessory)

Main sunshield

Align " " to " ".

STEP 10

Fix the front and rear sunshields on the camera using

the front/rear sunshield fixing screw (accessory).

(Recommended tightening torque: 0.72 N·m)

Front and rear sunshields fixing screw (accessory)

Important:

• When the power of the camera is turned on,

the camera will start panning and the position

will automatically be initialized.

Note:

• When removing the front and rear sunshields,

perform steps 8 to 10 in the reverse order.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

Sin comentarios

Panasonic WV-CW590 Guía de instalación Pagina 19