Panasonic WV-CW304L Guía de instalación descargar pdf (Pagina 20)

Note:

 • Donotputyourhandsonthesafetywarninglabelwhenthecameraangleisadjusted,unless

your hands will be clamped when the front portion of camera falls.

 • Useahexagonalwrenchwithwidthacrossflatsof3mm(locallyprocured)toloosenortighten

the yow lock screw, panning lock screw and tilting lock screw.

 • Approximately1rotationoflooseningtheyowlockscrew,℃panninglockscrewandtiltinglock

screw allows camera angle adjustment. Do not loosen the screws beyond necessity.

 • The camera body shall beheldwhen the yow lock screw,panning lock screw ortilting lock

screw is loosened.

 • Focus adjustment shall be performed at the same time panning and tilting adjustments are

performed.

2 Adjust the angular field of view and the focus.

CW324L

CW304L

CW314L

CW324L

CW304L

CW314L

Adjust the angular field of view in accordance with the distance between the camera lens and a

photographic subject. These adjustments shall be performed together with the camera angle

adjustment.

1 Loosen the zoom knob and adjust to the best view angle between TELE and WIDE.

Note:

 • Thefocusmaynotbeadjustedsmoothlywhenthezoomadjustmentringisextremelycloseto

the end of W direction (T direction). At this time, slightly adjust the zoom adjustment ring

towards the T direction (W direction), and then adjust the focus.

2 Tighten the zoom knob.

3 Adjust the focus knob to get the optimal angular field of view between NEAR and FAR.

4 Press the set button on the side of the camera, which will automatically focus.

Note:

 • PressthesetbuttontoenterintotheABFfunction.

 • If the set button is pressed continuously for more than 2 seconds, the setup menu will be

displayed.

Set button

Zoom knob Focus knob

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 31 32

Sin comentarios

Panasonic WV-CW304L Guía de instalación Pagina 20