Panasonic WV-CP500 Guía de instalación descargar pdf (Pagina 12)

Precautions for installation

This camera is designed to be used

indoors. This camera is not operable out-

doors.

Do not operate this product beyond the

specified temperature, humidity or power

source ratings.

Use this product at temperatures within

–10 °C to +50 °C {14 °F to 122 °F}, and

humidity below 90 %.The input power source

is 12 V DC/24 V AC (WV-CP504) or 120 V AC

(WV-CP500).

Installing place

Contact your dealer for assistance if you are

unsure of an appropriate place in your partic-

ular environment.

 • Make sure that the installation area is

strong enough to hold the camera, such

as a concrete ceiling.

 • If a ceiling board such as plaster board

is too weak to support the total weight,

the area shall be sufficiently reinforced.

 • Do not install this productin a humid or

dust-laden environment.

Otherwise, lifetime of the internal parts

may be shortened.

Avoid installing in the following locations.

 • Locationswhereitmaygetwetfromrain

or water splash

 • Locations where a chemical agent is

used such as a swimming pool

 • Locationssubjecttosteamandoilsmoke

such as a kitchen, Locations near flam-

mable gas or vapor

 • Locations whereradiation or x-ray emis-

sions are produced

 • Locations subject to strong magnetic

field or radio waves

 • Locations where corrosive gas is pro-

duced

 • Locations whereit may be damaged by

briny air such as seashores

 • Locations where the temperature is not

within –10 °C to +50 °C {14 °F - 122 °F}.

 • Locations subject to vibrations (This

product is not designed for on-vehicle

use.)

 • Locationssubjecttocondensationasthe

result of severe changes in temperature

Avoid installing the camera in a place with

a high level of noise.

Installation near an air conditioner, an air

cleaner, a vending machine, or the like

causes noise.

Avoid connections during a lightning

storm.

Otherwise, an electric shock may be caused.

Be sure to remove this product if it is not

in use.

Keep the camera cable away from the

lighting cable.

Failure to observe this may cause noise.

Radio interference

When the camera is used near TV/radio

antenna, strong electric field or magnetic

field (near a motor or a transformer), images

may be distorted and noise sound may be

produced.

Mounting screws

 • Screws are not supplied with this prod-

uct.

 • Prepare them according to the material

and strength of the area where the prod-

uct is to be installed.

 • Do not use an impact driver. Use of an

impact driver may damage the screws.

 • Thescrewsandboltsmustbetightened

with an appropriate tightening torque

according to the material and strength of

the installation area.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

Comentarios a estos manuales

Sin comentarios

Panasonic WV-CP500 Guía de instalación Pagina 12

Comentarios a estos manuales

Relacionado con productos y manuales para Cámaras De Seguridad Panasonic WV-CP500