Panasonic WJ-ND400 Guía de instalación descargar pdf (Pagina 24)

3 Place the provided rack mounting brackets on both

sides of the recorder and fix them with the rack

mounting bracket fixing screw (x6).

Secure them using the rack mounting bracket fixing screw

(x6).

4 Install the recorder in the rack by using four rack

mounting screws.

Secure using the rack mounting screws.

Important:

 • Wheninstallingtherecorderintherack,makeaspaceof

1U (44 mm {1.73"}) above and below the recorder for ven-

tilation.

 • Keepthetemperatureintherackbelow+45°C{113°F}.

 • Itisrecommendedtoinstallcoolingfansorequivalentsto

keepthetemperatureintherackbelow+30°C{86 °F}.

 • Donotblocktheventilationopeningsorslotstoprevent

the recorder from overheating.

Install the recorder in a rack

Install the recorder in an EIA standard 19-inch rack (Depth: 550

mm or more).

Note:

 • UsefourM5x12screws(locallyprocured)toinstallthe

recorder in a rack.

■ Installation procedure

1 Remove the five rubber feet from the bottom of the

recorder using a flathead screwdriver.

Use a screwdriver to remove the screws holding the rub-

ber feet.

2 Attach the rack handles to the rack mount brackets.

Fix them using the screws (x4) and the washers (x4) for the

rack handle.

Remove rubber feet

Rack handle

Rack mounting bracket

Screws for the rack handle

Washer

Rack mounting brackets (provided)

Rack handle

Rack mounting bracket fixing screws (provided)

Rack mounting screws (M5 x 12, locally procured)

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 63 64

Sin comentarios

Panasonic WJ-ND400 Guía de instalación Pagina 24