Panasonic PTLM1E Instrucciones de operaciones descargar pdf (Pagina 19)

ENGLISH-37

Adjustments and settings

36-ENGLISH

BRIGHT

This adjusts the darker areas (black

areas) in the picture.

Black areas are too light: I button

Dark areas are too solid: H button

COLOR

(S-VIDEO/VIDEO/YPBPR only)

The colour is too deep: I button

The colour is too pale: H button

TINT

(NTSC/NTSC 4.43/YPBPR only)

This adjusts the flesh tones in the picture.

The flesh tones are greenish

: I

button

The flesh tones are reddish

: H

button

SHARPNESS

To soften the picture details

: I

button

To sharpen the picture details

: H

button

COLOR TEMP.

This is used to adjust the white

areas of the picture if they appear

bluish or reddish.

White balance R/G/B

(W-BAL R/G/B)

(RGB only)

This is used to adjust the white

areas of the picture if they appear

colourised.

To make the selected colour lighter

: I button

To make the selected colour stronger

: H button

This should normally be set to

“AUTO”. If the signal is of such poor

quality that the correct format

cannot be automatically

distinguished, change the setting

manually to the required TV system.

TV-SYSTEM AUTO

[

NTSC

[

NTSC4.43

[

PAL

[

PAL-M

[

PAL-N

[

SECAM

TV-SYSTEM

(S-VIDEO/VIDEO only)

AI

ON

The lamp is controlled according to

the input signals to project images

with the best quality.

OFF

“AI” is disabled.

COLOR TEMP. STANDARD

[

HIGH

[

LOW

STILL MODE

To reduce flickering of still images (vertical

flicker), set “STILL MODE” to “ON”.

SIGNAL MODE

(RGB/YPBPR only)

This displays the type of signal which is

currently being projected.

Refer to the table on page 58 for details on

each type of signal.

sRGB is an international colour reproduction

standard (IEC61966-2-1) established by the

International Electrotechnical Commission

(IEC). If you would like the colours in sRGB-

compatible pictures to be reproduced more

faithfully, make the following settings.

##

Press the

FF

or

GG

button to select

“PICTURE MODE”, and then press the

II

or

HH

button to select “NATURAL”.

$$

Press the STD (standard) button on the

remote control unit.

%%

Press the

FF

or

GG

button to select

“COLOR TEMP.”, and then press the

II

or

HH

button to select “STANDARD”.

STILL MODE OFF

[

ON

AI ON

[

OFF

NOTE:

B sRGB is only enabled when RGB

signals are being input (when “LAMP

POWER” is set to “HIGH”).

NOTE:

B Do not set “STILL MODE” to “ON”

when playing back moving images.

NOTE:

B “AI” is disabled when “LAMP

POWER” is set to “LOW”.

(Refer to page 43.)

Projecting sRGB-compatible

pictures

NOTE:

B When set to “AUTO”, the

projector automatically

distinguishes between

NTSC/NTSC 4.43/PAL/PAL60/

PAL-M/PAL-N/SECAM signals.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 30 31

Comentarios a estos manuales

Sin comentarios