Panasonic PVDV852 Instrucciones de operaciones descargar pdf (Pagina 59)

Notes & Precautions

ª Power-Related Items

(l 12)

≥When the Palmcorder is used for a long time, the Camera

body becomes warm, but this is not a malfunction.

≥If the [CHARGE] Lamp does not light up although the

Battery is attached, detach the Battery, and reattach it.

ª Inserting/Ejecting the Cassette

(l 13)

≥In the case of using a previously recorded Cassette, you

can use the Camera Search Function to find the position

where you want to continue recording.

≥If a new Cassette is inserted, rewind to the beginning of the

tape before starting recording.

If the Cassette Holder Does Not Go Back in:

≥Press the [PUSH TO CLOSE] mark and close the

Upper Cassette Compartment Cover firmly.

≥Turn off the Palmcorder and then turn it on again.

≥Check if the Battery charge is low.

If the Cassette Holder Does Not Come Out:

≥Close the Lower Cassette Compartment Cover

completely. Then, open it again.

≥Check if the Battery is weak.

ª Alarm Sounds

When [BEEP] on the [OTHER FUNCTIONS] Sub-Menu on

the [CAMERA FUNCTIONS] Main-Menu is set to [ON],

confirmation/alarm beeps are issued as follows.

1 Beep

≥When you start recording

≥When you switch the [OFF/ON/MODE] Switch from [OFF]

to [ON]

2 Beeps

≥When you pause recording

10 Beeps

≥If you perform a wrong operation before or during recording

ª Recording

(l 20)

≥Before turning on the Palmcorder, remove the Lens Cap. If

the lens cap is still attached when the Palmcorder is turned

on, Automatic White Balance Adjustment may not function

correctly.

ª Recording Check

(l 20)

≥For recording check, the Palmcorder must be the same as

the recording speed Modes (SP/LP) used for the recording.

Otherwise the playback images will be distorted.

ª Camera Search

(l 20)

≥In Camera Search Mode, images may contain mosaic-like

noise patterns. This is a phenomenon that is characteristic

of digital video and not a malfunction.

≥If the recording speed Modes (SP/LP) of previous

recording and new recording are different, playback

images may be distorted.

ª Progressive PhotoShot

Mode

(l 21)

≥When you change to the still picture Mode, you will hear a

click. This is the sound of the iris closing and not an

indication of malfunction.

≥If you record still pictures in Progressive PhotoShot

Mode when your Palmcorder is set to Program AE, the

brightness of the images may vary.

About [PROGRESSIVE] Setting

≥When the [æ] Indication is displayed, you can use the

Progressive PhotoShot Function.

When [PROGRESSIVE] is set to [ON]:

You can use the Progressive PhotoShot Function at any

time. In this case, however, the following functions are

disabled.

≥[EFFECT1] Digital Effect Modes

≥Digital Zoom [D.ZOOM]

≥1/750 or faster shutter speed

≥Continuous PhotoShot Function

≥[REC MODE] on the [CAMERA SETUP] Sub-Menu is set

to [NORMAL] ([FRAME] is not available)

When [PROGRESSIVE] is set to [AUTO]

You cannot use the Progressive PhotoShot Function in the

following circumstances.

≥When the zoom magnification is approximately 10k or

higher

≥When the shutter speed is 1/750 or faster

≥When [EFFECT1] is set to [WIPE], [MIX], [STROBE],

[MAGICPIX], [TRAIL], [MOSAIC], [MIRROR]

≥When the pictures are displayed on a Multi Screen or P-IN-

P screen

≥Continuous PhotoShot Function

ª Zoom In/Out Functions

(l 21, 22)

≥By pressing the [W/T] zoom lever to [W] or to [T] in

Recording Pause Mode, you can zoom 1– 10k at the

maximum speed of 0.4 seconds.

≥During recording, you can zoom 1– 10k in as short a time

as approximately 0.8 seconds.

≥During considerably fast zooming, the image may become

out of focus temporarily.

≥When you are using a high amount of zoom, a sharper

focus is achieved if the recording subject is approximately

4 feet (1.2 m) or more away from the Palmcorder.

ª Optical Image Stabilizer Function

(l 22)

≥Within the digital zoom range, the Optical Image Stabilizer

function may not work effectively.

≥If [TAPE/CARD] selector is set to [TAPE], [ EIS]

cannot be set.

≥If [STILL/MPEG4/VOICE] Selector is set to [MPEG4] or

[VOICE], [ EIS] cannot be set.

≥Within the digital zoom range, or when recording with a

conversion lens attached, the Optical Image Stabilizer

function may not work effectively.

≥When a tripod is used, it is recommended that you turn the

Optical Image Stabilizer function off.

ª Fade In/Out Mode

(l 22)

Fading-in and fading-out cannot be used when recording still

pictures in the PhotoShot Mode, Digital Still picture Mode,

Multi-Picture Mode, and for the small still picture in the

Picture-in-Picture Mode.

MEGA

137P.book 59 ページ２００２年３月１９日火曜日午後２時５７分

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 155 156

Comentarios a estos manuales

Sin comentarios

Panasonic PVDV852 Instrucciones de operaciones Pagina 59

Comentarios a estos manuales

Relacionado con productos y manuales para Videocámaras Panasonic PVDV852