Panasonic HDCSX5 Manual de usuario Pagina 120

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 160
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 119
120
VQT1G62
With a computer
Connection and recognition
After the software applications are installed, this
unit must be connected to the computer and be
correctly recognised by the computer.
Connect after installing the software
applications.
Remove the supplied CD-ROM if it is inserted
in the computer. (If the [Setup Menu] screen is
displayed, wait until it finishes and then remove
the CD-ROM.)
If the recognition procedure is not
accomplished properly, operation will not be
possible after connecting the unit to the
computer.
If the unit fails to operate normally, it may mean
that you have not conducted the installation or
recognition procedure properly.
Be sure to finalize all discs other than
DVD-RAM before using them with a
computer. Un-finalized discs cannot be
recognised by the computer.
1 Connect this unit to the AC
adaptor.
If a battery is used, operation is not possible
when this unit is connected to a computer.
2 Insert a disc or card with
recorded images in the unit, then
turn on the unit.
3 Connect this unit and a
computer.
A USB cable (supplied)
The USB function selection screen will appear.
Insert the plugs as far as they will go. The unit
and computer will not operate properly if the
plugs are not inserted fully.
Do not use any other USB connection cables
except the supplied one. (Operation is not
guaranteed with any other USB connection
cables.)
4 Select [PC CONNECT (DISC)] or
[PC CONNECT (CARD)] and then
press the cursor button.
This unit is automatically recognised by the
computer.
Connection and recognition
procedures
HDC-SX5-VQT1G62_EP_eng.book 120 ページ 2007年7月24日 火曜日 午前9時57分
Vista de pagina 119
1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 159 160

Comentarios a estos manuales

Sin comentarios