Panasonic WV-CW334 Instrucciones de operaciones

Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.The model number is

10Precautions for installationPanasonic assumes no responsibility for injuries or property damage resulting from failures arising out of improper inst

11Screw tightening • The screws and bolts must be tightenedwith an appropriate tightening torque according to the material and stren

12Major operating controls and their functions1234q Power cord* This illustration shows the camera without the inner dome.w Video output cablee Dome c

13 q Power cord Supplies 24 V AC or 12 V DC from an external power source. w Video output cable Transmits composite video signals

14 Adaptive black stretch selector [B.S.]:ON (default): Corrects the dark area of an object automatically to lighten it.OFF: Does not compensate.No

15PreparationsWhen installing the camera on a wall or a ceiling, there are two methods as specified below. (+ Next page) • Usinga

16Using a two-gang junction box • Whenthecameraisinstalledusingthetwo-gangjunctionbox,mountthecameraattachment(accessory) to the embed

17z Install the mounting base on the wall/ceiling.Note: • Onlythesametypeofholes,A or B, shall be used for mounting. BBBAAA51 mm {2 inche

18x Previously run the cables from the wall or ceiling through the cable access hole. c Mount the attachment onto the mount bracket. Recommend

19Camera installationz Mount the camera. <To mount the camera on a two-gang junction box> q Connect the power cord and the video output cable.

2CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,DO NOT REMOVE COVER (OR BACK).NO USER-SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PER

20<To use the mounting base> q Attach the camera onto the camera attachment while aligning the "OPEN" mark of the camera with the p

21 w Engage the attachment mounting screw of the camera with the camera mounting hole of the camera attachment and rotate the camera in the dir

22 t Mount the supplied base cover on the mounting base. Important: • To prevent the cables from being caughtwhen the base cover is at

23c Secure the camera to the bracket with the camera fixing screw (red, 1 position). Important: • Thecamera fixing screw shall be securelyt

24Adjust the cameraz Pan, tilt and azimuth adjustment Important: • Do not touch the iris motor. Failure toobserve this may cause trouble.

25Note: • When the zoom lock knob is adjusted to the WIDE side and the tilt angle is approx. ±75 °, 1/3 part of the screen may be hid-den.Im

26Waterproof treatment for the cable joint sectionsAdequate waterproof treatment is required for the cables when the camera with exposed cables is ins

27Important: • Ifopenwiringisconducted,besuretouseconduitsandrunthecablesinsidethetubestopro-tect the cables from direct sunlight.

28Make a connectionCautions: • FOR UL LISTED MODEL(S), ONLY CONNECT THIS TO 24 V AC OR 12 V DC CLASS 2 POWER SUPPLY. • Besuretoco

29• Cord length and wire gauge24 V ACThe recommended cord length and copper wire size are shown in the table for reference. The voltage supplied

3We declare under our sole responsibility that the product to which this declaration relates is in conformity with the standards or other normative

30Optional Heater Unit WV-CW5H (option)Installing the heater unit enables the camera to operate in a low-temperature environment below –30 °C {

31TroubleshootingBefore asking for repairs, check the symptoms with the following table. Contact your dealer if a problem cannot be solved even after

32Specifications• BasicPower source: NTSC: 24 V AC 60 Hz, 12 V DC PAL: 24 V AC 50 Hz, 12 V DCPower consumption: 24 V AC: 2.9 W (without heater

33Switch Function: Simple day/night mode selector for WV-CW334S, day/night mode selector for WV-CW364S (ON/OFF), adaptive black stretch selector (ON

34Standard accessoriesInstallation Guide (this book) ... 1 pc.Warranty card (NTSC models only) ...

35Optional accessoriesDome cover WV-CW4SHeater unit WV-CW5HCeiling mount bracket WV-Q169

For U.S. and Canada:Panasonic System Networks Company of America,Unit of Panasonic Corporation of North Americawww.panasonic.com/business/For custom

4Important safety instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5)

5Limitation of liabilityTHIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDIN

6ContentsImportant safety instructions ... 4Limi

7PrefaceThis product is surveillance color CCTV camera equipped with a 1/3 type CCD solid-state image sensor with 768 horizontal pixels (NTSC), 752

8PrecautionsThe following points as well as the con-tents of "Warning" and "Caution" shall be observed. Refer installation work to

9[Precautions for use]This product has no power switch. When turning off the power, turn off a circuit breaker.To keep on using with stable pe